DS200ADGIH1AAA|The auxiliary interface board was manufactured by General Electric
This DS200ADGIH1AAA product from General ELectric is a printed circuit board originally manufactured for the Mark V family of turbine control systems, as described in the brief product description above. As you might have guessed from its full extended family name, the DS200ADGIH1AAA printed circuit board, or PCB for short, belongs to the Mark V family and has a range of specific applications in management and control systems in GE compatible steam and gas turbine automation drive assemblies. The Mark V series featuring this DS200ADGIH1AAA device, while related to newly developed turbine control applications, can still be considered obsolete as a whole, as it is GE’s legacy product line, discontinued in the years after its initial release due to obsolescent feature lines introduced by retailers. While generally obsolete, the Mark V was one of the last product families developed by GE, leveraging the patented Speedtronic control system technology that first appeared with the introduction of the previous Mark I series in the mid-to-late 1960s.
Hardware tips and specifications
As with any product offered in the Mark V family of turbine control systems, the intended functionality of this DS200ADGIH1AAA device is introduced by accepting a range of specialized hardware components and component specifications for its normal Mark V Series components. The GE auxiliary interface board DS200ADGIH1AAA has a 40-pin connector, 60 jumpers, and a 6-pin connector. The GE auxiliary interface board DS200ADGIH1AAA is also equipped with multiple test points. The board is 8 inches wide. The DS200ADGIH1AAA is 6 inches long and is designed to be installed in the driver’s board cabinet. It has four screws, which are aligned with a position on the board frame for mounting with screws. As mentioned earlier, this DS200ADGIH1AAA product belongs to a legacy product family that is now obsolete. Because of this, it is not surrounded by a lot of original printed online instruction manual material. In this case, the DS200ADGIH1AAA functional product number itself can be identified as a good primary source of hardware component and component specification information for the DS200ADGIH1AAA Board; Encode specific details in a collection of functional named segments of the design. For example, the DS200ADGIH1AAA functional product number contains details about the normal Mark V series components of this PCB, its conformal coating style, and its triple product revision table, which includes three seemingly identical Class A product revisions.
The test point in the DS200ADGIH1AAA device assembly provides a method for testing a circuit board circuit. However, only a qualified service provider can test the board. The vendor must have calibrated and designed test equipment. The controls must be set up correctly, and the probe must be designed to work with the tester. Place the board on a flat surface and place a protective bag under the board. In addition, due to the risk of static electricity, DS200ADGIH1AAA Board service providers must always wear a wristband. When the wristband is properly installed, one end of the wristband is attached to your wrist and the other end is clipped to the metal leg of the workbench or table. It can also be attached to other metal structures. Static electricity is attracted to the metal ground and leaves the circuit board or your body. Another appropriate step to reduce static buildup is to avoid moving around while holding the board in your hands. The friction of walking causes static electricity to build up. This is especially true in cool, dry weather conditions. If you don’t have a wristband, you can also touch the static bag with the board onto a metal structure, such as a chair or metal table leg.
FAQ about DS200ADGIH1AAA
What is the size of DS200ADGIH1AAA?
The DS200ADGIH1AAA is 8 inches wide. The DS200ADGIH1AAA is 6 inches long.
How is the claw on DS200ADGIH1AAA marked?
The insert claw on DS200ADGIH1AAA is marked with EG1-EG4. On DS200ADGIH1AAA, they are located in a square form on DS200ADGIH1AAA.