The DS200DMCBG1AKG is a GE IOS processor board produced by trusted industrial retailer General Electric. The relative scarcity of instruction manual materials on the Internet makes it a difficult product to isolate specific manufacturers and families, but at AX Control we do everything possible to keep this module in stock to meet your various automation industrial needs. This particular PCB is modified by functional revision 1 of A, functional revision 2 of K, and art revision rated G. As mentioned earlier, this DS200DMCBG1AKG General Electric product was manufactured for their Mark V family of turbine control systems. As you might tell from its full extended series name, this DS200DMCBG1AKG PCB’s Big Mark V Series has specific applications in popular and compatible management and control systems for automated drive components for wind, steam and gas turbines. The Mark V series of this DS200DMCBG1AKG PCB is considered to be a traditional product range at GE, as it has been discontinued for many years after its original establishment. Indeed, the Mark V turbine control system family is still well updated, as it was one of GE’s last product families to incorporate patented Speedtronic control system technology into its various products.

Hardware tips and specifications

Like many GE Industrial Systems Fanuc products, the GE IOS DUP processor board DS200DMCBG1AKG is unique in a number of important hardware specifications. Based on a thorough visual inspection, the DMCB model contains several unique elements, including:

Three 26-pin connectors
A 40 pin connector
2 LED indicators in total
Surface mount RESET switch
19 jumpers in total
The installer can use the jumper on the DS200DMCBG1AKG to change the behavior of the board. The manual that came with the factory original board describes the jumpers and how they change the behavior of the board, although as mentioned earlier, the online availability of this manual is relatively limited. While customizable hardware jumpers do exist on the backboard of this DS200 DMCB, not all of them can be moved by installers or qualified service providers. Some of the jumpers on the baseboard of this module are hardwired jumpers and are only used for testing purposes in manufacturing plants. These jumpers can also be identified by the GE Fanuc or other series manuals that came with the original board. While manual information for this model is often lacking on the Internet, a series of factory-issued labels on the backboard of this board can clarify other important hardware specifications. For example, the DS200DMCBG1AKG model has the “IOS Master” function description posted at the top of the board. In addition to this initial General descriptive label, this DMCG PCB model is equipped with a variety of labels, including C-ESS, V 5, and General Electric U.S.A, as well as standard industry labels for hundreds of relays and numerous plugs on the DMCG surface. This DS200DMCBG1AKG model appears to have a total of nine plugs on the backboard of this PCB.

Installation tips and specifications

While the DS200DMCBG1AKG offers a range of important hardware specifications, it is also important to introduce a careful and sensible installation process. Note that when you replace this DMCB board, you simply move the jumper to match the position of the jumper on the old board. When you inspect the board side by side, you may find that the jumpers on the replacement board are in different locations due to a design update. The best practice is to identify jumpers on an old board by the identifier printed on the board. The identifier of the jumper may be JP1, JP2, or JP3. Leds are identified as CR2 and CR12. During installation, it is important to find the correct jumper on the replacement board and make sure it covers the same pins.

The installation of the DS200DMCBG1AKG module is supported by the inclusion of several factory holes and insulation holes in the substrate. Safe PCB installation should also be encouraged by a common printed circuit board protection coating for this processor board, which is rated much thicker than the alternative conformal PCB coating. As mentioned earlier, this particular DMCB product has a relatively extensive history of triple revisions; Feature Revision 1 is rated A, Feature Revision 2 Special is rated K, and Artwork Revision is rated G. These revisions can significantly improve the overall drive function and can dramatically change the size of the module components. With this in mind, it is always important to ensure correct module revisions before purchasing a DS200DMCBG1AKG. Even if the component is in a different position on the baseplate compared to the replacement module; When properly installed, the replacement board provides the same processing capabilities. This should be achieved by performing a series of voltage protection tests on the replacement board to ensure that it maintains compatibility.

FAQ about DS200DMCBG1AKG
What are the plug labels for this DS200DMCBG1AKG product?

While the DS200DMCBG1AKG offers some jumpers and other components with standard labels, it offers a range of plugs labeled 1PL through 4PL. A plug label specific to this PCB component is present in its ARCPL plug and corresponding label.
Does the DS200DMCBG1AKB component itself have any printed labels?

Yes. Although the printed circuit board itself is printed with many labels for identification purposes, many relays and circuits have printed information indicating the characteristics of the product; Includes Toshiba TC551001BPL-85 components.
Does the DS200DMCBG1AKG come with any capacitors?

Yes. The DS200DMCBG1AKG DOS DUP processor board uses multiple capacitors for voltage protection. Many of these capacitors are located in the upper left quadrant of the PCB assembly; Easily recognized by its distinctive bright blue color.